Latest pcs tapper roller bearing Tenders | Government pcs tapper roller bearing Tenders

Central Government / Public Sector

CTN :43534769

05 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de and nde side modified end shield with inner and outer bearing cover suitable for 6306c3 bearing of od 72mm and width 19mm of m/s ranjan make sctmb motor of frame size 100l, protection ip 55 and material as per is-210 grade-220. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43534770

05 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de & nde side modified end shields with inner & outer bearing cover suitable for 6305/c3 bearing of od-62mm & width-17mm of m/s. ranjan make scmrb motor of frame size 90l, protection ip-55, material as per is-210, grade 220. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43534832

06 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de and nde side modified end shield with inner and outer bearing cover suitable for 6306/c3 bearing of od=72mm and width 19mm of m/s shil make sctmb motor of frame size 100l, protection ip-55 and material as per is-210 grade 220. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43534833

06 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of set of de & nde side modified end shield with inner and outer bearing cover suitable for 6305/c3 bearing of od = 62 mm and width 17 mm of m/s shil make scmrb motor of frame size: 90l, protection ip - 55, material as per is-210 grade 220. [ warranty period: 30 months after the date of delivery ]

CTN :43528792

21 Jan, 2026 NA

Baramulla - Jammu And Kashmir

Tender For supply of ismb 150mm x 75mm x 5. 80 mtr or beam , ismb 150mm x 75mm x 3. 50 mtr long for beam , ismc 75x40, 3. 5 m long welded with plate 250x250x6mm on one side with holes drilled , srt 1630 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet , steel roofing trough srt of size 1700 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet , srt of size 1270 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet , pbs roll self finished tarfelt hessian base for water proofing grade 1 , hdpe sheet 400 micron , hdpe sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , load bearing concrete pcc solid blocks of size 400mm x 200mm x 200mm using plain cement concrete , pre prefabricated steel door confirming to is 1038-1983 reaffirmed 2001 of size 900mm x1800mm. the door chowkhat frame made angle iron 50mm x 50mm x 6mm with 03 nos , ms hexagonal nuts. bolts and washer 12 mm dia 40 mm long , plywood 8 feet x 4 feet x 12mm thick , cgi sheet 810 x 1830 mm long, 0. 63mm thick , red oxide primer conforming to relevant is , thinner sample to be approved before supply , natural m sand conforming ton relevant is specifications for coarse and fine aggregates , agg 20mm stone aggregates to be crushed rock or gravel 20mm graded , agg 40mm stone aggregates to be crushed rock or gravel 40mm graded , agg 63mm. stone aggregates to be crushed rock or gravel 63mm graded

CTN :43414033

15 Jan, 2026 10.09 Lacs

Thiruvananthapuram - Kerala

Tender For construction of madakkathara grama panchayath stadium in ollur lac, thrissur- supply and installation of outdoor gym equipment - open gym equipment, od263824/2025-2026 : chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material.foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263826/2025-2026: air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin's ø 25mm m.s. bright bar pin. circlips- a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263830/2025-2026 : leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is ø 60 mm od “b” class gi pipe. seat frame - ø 42 mm od “b” class gi pipe. leg press back rest should be angled in 120 - 130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest – 380 x 275 x 60 mm thick high- density polyethylene (hdpe) blow molded with m

CTN :43463693

21 Jan, 2026 4.64 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- thanniyam stadium in kallara grama panchayath in vamanapuram lac, thiruvananthapuram- supply and installation of outdoor gym and sports equipment - outdoor gym equipments, od252260/2025-2026 : horse rider - supply and installation of horse rider having the following specifications:dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundationplate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon /hdpe material. remaining frame is made by 48 mm od ?b? class gi pipe. seat frame ?is made by 48mm od ?b? class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od ?b? class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od ?b? class gi pipe. paddle vertical support - 60 mm od ?b? class gi pipe. handle frame- 42 mm od ?b? class gi pipe dually bending design. foot pipe - 33 mm od ?b? class gi pipe. support frame ? 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe.bearing bush closing cap ? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft.foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand.bearing bushes - 60mm od seamless pipe. pin ? made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips ? a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252261/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od ?b?class g.i. pipe. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od ?b? g.i pipe. seat rest pipe ? 42 mm od ?b? class g.i pipe. handle pipe ? 33 mm od ?b? class g.i pipe.footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe ? 42 mm od ?b? class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap ?pp / nylon / hdpe material. seat ? 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252262/2025-2026 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b?class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x296 x 5 mm thick and m.s. plat

CTN :43521762

30 Jan, 2026 NA

Baramulla - Jammu And Kashmir

Tender For supply of cab frame base front rh , cab frame base front lh , carrier bearing wheel , spring shock rear , asm seat base , asm bar sway rear

Central Government/Public Sector

CTN :43344654

14 Jan, 2026 1.23 Crore

Chirmiri - Chhattisgarh

Tender For corrigendum : supply of vishwa belt conveyor spares d d - jaw clutch driving part and driven part part no 444555 , p by block assy drive driven drum part no 575510 , p by block assy for discharge drum part no 655510 , p block assly for tail takeup drum part no pbtdpbtud5510 , hand operated winch in set part no hw5510 , bed frame for 1x55kw part no bf5510 , rotating bush bk part no vb2055 , rotating bush ck part no vb225575 , rotating bush dk part no vb2455 , rotating bush fk part no vb2855 , input shaft bearing cover part no 555 , input shaft bearing cap part no 655 , input shaft oil seal part no 955 , input shaft spacing washer part no 1355 , input pinion shaft bearing part no 1455 , 2nd intermediate shaft bearing part no 2755 , output oil seal part no 3555 , rotating bush gk part no vb3255 , hold back part no 45510 , input shaft oil seal part no 975 , 1st stage gear and pinion with integral sh part no 1118c75 , input pinion shaft bearing part no 1475 , 1st intermediate shaft bearing part no 197510 , 2nd intermediate shaft bearing part no 277510 , output shaft oil seal part no 3575 , 3rd stage gear and pinion in set part no 30367510 , equalising gear in set of two nos part no 527510 , input shaft oil seal part no part no 990 , input shaft part no 1090 , 1st stage gear and pinion in set part no 1118c90 , input pinion shaft bearing part no 1490 , output shaft oil seal part no 3590 , jaw clutch driving and driven part no 444590 , p block assy for tail drum part no pbtd90 , loop take up trolley 90 kw vishwa make part no ltt90 , hand operated winch in set lh and rh part no hw9010 , rotating bush bk part no vb2090 , rotating bush ck part no vb2290 , rotating bush dk part no vb2490 , rotating bush fk part no vb2890 , rotating bush gk part no vb3290 , first intermediate shaft bearing part no 1990 , second intermediate shaft bearing part no 2790 , equalising gear in set of two nos 52 part no 5290 , hold bacjk part no 490 , output shaft bearing part no 3790 , equalizing gear guard part no 5190 , p by block assy for tandem drive drum part no 579010 , plummer block with bushing for discharge part no 6590 , p by block assembly for ht snub drum part no 669010 //bid details2 / 45

CTN :43400943

17 Jan, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply ofjcb 3dx super - 400-05498,valve housing assy , 332-y3299,strainer fuel , 402-k0457, sprocket , 401-w0392,wa hand rail , 334-l7702,920-90004,beading screen front , 334l5477,704-s4053,hour meter , 400-05044,valve assy , 400-05043,valve set charging , 332-y9388,clamp t bolt , 333-y4672,insert 117m6 , 333-y4109,floor mat protector , 819-00035,shim 0. 500mm , 333-l4952,pad rebound , 333-l4950,pad rebound , 333-l1780,mud flap rear , 333-l1893,mud flap front , 332l0259,mount transmission damper body , 333p8604,frame rear grill , 333-p2276,bearing liner , 332-l7944,pin pivot , 333-l8022,pin pivot , 333p2873,335-h5759,glass rear , 333-p4140,cable parking , 265-02145,hose servo 1 by 4 inch lp -1d-1 , jrj0098,hose 1 by 4 inch bsp st 90x900mm , 332y9745,spring cup , 332-y9744,washer , 332-y9727,ring backup , 332-y9735,circlip , 332-y9743,washer , 332y9734,spring cup , 332-y9731,disc carrrier , 335c7052,clamp t bolt , 335-c7061,clamp t bolt 136 fleet g , 335-e6719,hose fuel , 332-l8103,hose fuel , 438-0003,wheel stud , 452-02700,kit brake pad , 32007280, 320-a7086,filter fuel assy ) /bid number: gem/2025/b/7023572 * /dated: 31-12-2025 & & / bid document1 / 33

Pcs Tapper Roller Bearing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector